Dryer Outlet Splitter Setup for Ford Mobile Charger

[Bunkichi_Mitsuko]

I’m getting my garage set up to charge my F150 Lightning, and I’m thinking about using my dryer outlet to run a Level 2 charger. My laundry room is right next to the garage, so my plan is to use the existing NEMA 14-30 outlet with a NeoCharge smart splitter, plus an adapter to connect it to a NEMA 14-50 plug for the Ford mobile charger.

This seems like a more affordable option than running new 6/3 wiring all the way from the panel downstairs, which would be about 80 feet of wiring. It this a better option, or are there potential issues I should be aware of?

Just trying to make sure I have everything ready before the truck arrives early next year! Also, is there a significant difference between using the Ford mobile charger on Level 2 versus a third-party Level 2 charger?

 

[F150Driver]

I will need a 24-amp charger if you want to avoid any issues with your setup because the Ford Mobile Charger will trip the 30-amp breaker.

 

[Habibi]

I’m getting my garage set up to charge my F150 Lightning, and I’m thinking about using my dryer outlet to run a Level 2 charger. My laundry room is right next to the garage, so my plan is to use the existing NEMA 14-30 outlet with a NeoCharge smart splitter, plus an adapter to connect it to a NEMA 14-50 plug for the Ford mobile charger.

This seems like a more affordable option than running new 6/3 wiring all the way from the panel downstairs, which would be about 80 feet of wiring. It this a better option, or are there potential issues I should be aware of?

Just trying to make sure I have everything ready before the truck arrives early next year! Also, is there a significant difference between using the Ford mobile charger on Level 2 versus a third-party Level 2 charger?

Im using my old Tesla charger with my Lightning. I got this little adapter thing to make it work, and it's been fine for the most part.

But lately, the splitter I'm using has been messing up. Sometimes it stops charging my truck even though the dryer isn't on. I have to go to the breaker box and flip the switch on and off five times to get it working again.

I wonder if it's just my splitter, or if other people have had this problem too.

 

[Sadking4.0]

I don't know how old your electrical system is, or how much of a pain it would be to run new wires.

Could you maybe run a new wire next to the one for your dryer?

Would your electrical panel be able to handle a new 40-amp circuit for that fancy new EV charger?

If you're gonna use a splitter with your dryer, you should definitely check the size of the wires in that circuit. And keep an eye on the breaker and the outlet for any signs of heat during the first few times you charge.

 

[eduardo_]

Use a charger that supports the charging protocol and power delivery requirements of your device. A higher wattage charger can reduce charging time, but verify compatibility to avoid potential damage.

 

[Benett3.0]

A 14-30 to 14-50 adapter could work, but you really need to make sure it limits the amps, otherwise, you'll overload the circuit. Some smart splitters, like the NeoCharge, have load management built-in so you don't have to worry about it.